AppleALC driver for Gigabyte X299 Aorus Gaming 9 ALC1220 audio

May 13, 2018, 12:51 am

≫ Next: [Solved] VoodooHDA Kernel Panic Bootloop

≪ Previous: Integrated Realtek 887 not recognized on High Sierra 10.13.4

$

0

0

This driver is for Gigabyte X299 Aorus Gaming 9 ALC1220, for stero 2.0 only, and it's working with lilu, This driver is compiled with Applealc 1.2.5 and lilu 1.2.3, please put both of these two kexts in clover/kexts/other.

And in clover-ACPI-DSDT-Patches, please be sure this patch added.

step 1

Code (Text):

comment:CAVS -> HDEF
find: 43415653
replace: 48444546
 

...

AppleALC driver for Gigabyte X299 Aorus Gaming 9 ALC1220 audio

---

[Solved] VoodooHDA Kernel Panic Bootloop

May 13, 2018, 2:24 am

≫ Next: No Sound - AppleHDA Realtek Audio

≪ Previous: AppleALC driver for Gigabyte X299 Aorus Gaming 9 ALC1220 audio

$

0

0

I decided to install VoodooHDA v2.9.0d10 to get sound working on my hackintosh but now I'm in a kernel panic boot loop. I can boot in safe mode, but I can't find a VoodooHDA.kext in the Extensions folder. How do I uninstall it?

System Specs
Dell Optiplex 9020
i7 4770 Stock Speeds
Intel HD4600 Graphics

System Report from Console

[Solved] VoodooHDA Kernel Panic Bootloop

No Sound - AppleHDA Realtek Audio

May 13, 2018, 2:58 am

≫ Next: [ALC898] PCIe Soundcard not working with OS X?

≪ Previous: [Solved] VoodooHDA Kernel Panic Bootloop

$

0

0

View attachment 285760
No Sound -
AppleHDA Realtek Audio_v2 [Guide]
Realtek ALC/Desktop: 885, 887, 888, 889, 892, 898, 1150 and 1220 on board audio
Supports macOS/OS X versions: 10.13, 10.12, 10.11, 10.10, 10.9 and 10.8

10.13/System Preferences/Sound/Output/Internal Speakers > Green audio port
View attachment 285759
Change Log
v1.0 - 10/14/2017: High Sierra Release

Previous thread:...

No Sound - AppleHDA Realtek Audio

[ALC898] PCIe Soundcard not working with OS X?

May 13, 2018, 3:58 am

≫ Next: Audio not working in High Sierra

≪ Previous: No Sound - AppleHDA Realtek Audio

$

0

0

Hello everyone,

Is it possible to run a PCIe-Soundcard with Mac OS?
I buyed a Creative Sound Blaster Audigy FX (Hardware ID: 10ec:0899), because it has a ALC898 Chip, which is also commonly used by mainboard-manufactures and a lot of people have a working osx86 with this chip.

Long story short: I tried to use a lot of possible ways to get this card running including AppleALC.kext, Lilu.kext and VoodooHDA.kext but none of them worked properly.
(But...

[ALC898] PCIe Soundcard not working with OS X?

Audio not working in High Sierra

May 12, 2018, 9:27 pm

≫ Next: No Sound Please Help!! - High Sierra 10.13.14 - Gigabyte GA-Z270X - Gaming K7

≪ Previous: [ALC898] PCIe Soundcard not working with OS X?

$

0

0

HI,

After installing HIgh Sierra, Audio is not working.

These are my system specs:
Mobo: ASUS TUF-B360-Plus Gaming
CPU: Intel Core i7 8700
RAM: 16Gb A Data XPG DDR4 2400 Mhz (2 x 8Gb)
Graphics: Asus GeForce 210 1024 MB
MacOS Drive: Samsung M.2 860 250Gb
MacOS: 10.13.4

I tried this way but not succeed:

MultiBeast 10.2: run MultiBeast twice:

1. Restart
2. MultiBeast > Drivers > Audio > RealtekALCxxx
   1. √...

Audio not working in High Sierra

No Sound Please Help!! - High Sierra 10.13.14 - Gigabyte GA-Z270X - Gaming K7

May 13, 2018, 11:28 am

≫ Next: [High Sierra] Can't get Multi-Output Device working

≪ Previous: Audio not working in High Sierra

$

0

0

Sorry meant to say High Sierra 10.13.4....I could use some help with my sound. I have managed to get most of my hackintosh working, and now I am stuck with no sound. I have installed my hackintosh using Unibeast and Multibeast. I have tried what I found online but with no luck. I added the AppleALC.kext and Lilu.kext to EFI/CLOVER/kexts/Other but had no luck. I have also tried using Multibeast and added the ALC1220 codec + 100/200/300 Series Audio Support, as well as each of the VoodooHDA...

No Sound Please Help!! - High Sierra 10.13.14 - Gigabyte GA-Z270X - Gaming K7

[High Sierra] Can't get Multi-Output Device working

May 13, 2018, 10:06 pm

≫ Next: [SOLVED] no audio devices mac os 10.13.4, S1220A codec

≪ Previous: No Sound Please Help!! - High Sierra 10.13.14 - Gigabyte GA-Z270X - Gaming K7

$

0

0

Hello mates,

I have two audio interfaces: Behringer UM2 and Steinberd UR12 and it worked flawlessly with Multi-Output on Sierra before.

But it's no more after an update to High Sierra. Now, every time I choose Multi-Output Device setting (selected 2 audio interfaces on the list) then all audio stops - only works when I select one single audio interface which is not listed on Multi-Output Device.

- Tracked on Console which is said something about "failed to lock the buffer" related Audio...

[High Sierra] Can't get Multi-Output Device working

[SOLVED] no audio devices mac os 10.13.4, S1220A codec

May 13, 2018, 11:34 pm

≫ Next: new troubles NO audio on sleep, but otherwise works

≪ Previous: [High Sierra] Can't get Multi-Output Device working

$

0

0

So brass tacks and all, everything else is working, but for the life of me, i cannot get the AppleALC.kext and Lilu.kext provided by github vit9696, using newest versions of each kext made available. It shows I should be supported and have run through everything i can think of to atleast make the devices show up, regardless of audio or not. I will be attaching my config plist and the 2 updated kexts i attempted to use(IF asked by admin) by it would seem clover method, put the two kexts in...

[SOLVED] no audio devices mac os 10.13.4, S1220A codec

---

new troubles NO audio on sleep, but otherwise works

May 15, 2018, 8:24 am

≫ Next: How can I enable HDMI without losing HDA?

≪ Previous: [SOLVED] no audio devices mac os 10.13.4, S1220A codec

$

0

0

So brass tacks and all, everything else is working, but for the life of me, i cannot get the AppleALC.kext and Lilu.kext provided by github vit9696, using newest versions of each kext made available. It shows I should be supported and have run through everything i can think of to atleast make the devices show up, regardless of audio or not. I will be attaching my config plist and the 2 updated kexts i attempted to use(IF asked by admin) by it would seem clover method, put the two kexts in...

new troubles NO audio on sleep, but otherwise works

How can I enable HDMI without losing HDA?

May 15, 2018, 8:31 am

≫ Next: Creative CA0132 codec discussion (Sound Core3D)

≪ Previous: new troubles NO audio on sleep, but otherwise works

$

0

0

Hi Toleda,

Wonder if you can suggest something that will address this issue.
I have tried the VoodooHDA.kext/VoodooHDAa.kext suggested fixes and neither of them help.
In the case of VoodooDHA - no change at all to my existing Audio and in the case of VoodooHDAa.kext Voodoo basically replaced my HDA altogether! I am posting a screenshot if what I have working and also what happens when I install VoodooHDAa...
Basically I can get HDA but none of the other LineOut options offer any sound at...

How can I enable HDMI without losing HDA?

Creative CA0132 codec discussion (Sound Core3D)

May 15, 2018, 2:39 pm

≫ Next: SupremeFX 2015 dropping out

≪ Previous: How can I enable HDMI without losing HDA?

$

0

0

Because a few users ask if audio is possible with this codec, especially for the GA-Z170X-Gaming 7 mainboard, here some solutions:

Below, a fully patched kext that gives you the default outputs. For headphones and front microphone you can use the attached switcher. Other layouts are also possible.
Why a fully patched kext? because i think it is the easiest way to make audio working. The Gigabyte Gaming 7 users, without a patched DSDT need only the HDAS to HDEF clover-patch.

If you want to...

Creative CA0132 codec discussion (Sound Core3D)

SupremeFX 2015 dropping out

May 16, 2018, 8:34 am

≫ Next: Audio Buzzing Sound

≪ Previous: Creative CA0132 codec discussion (Sound Core3D)

$

0

0

Hi there,

Got a Maximus VIII Ranger board which has the SupremeFX 2015 audio, I got it working using ALC1150 and 100 series audio via MultiBeast. I found an issue where when watching say a youtube video then switching to another youtube video, I loose sound until I put it to sleep or reboot. This is over SPDIF if that makes any difference.

Has anyone else came across this issue and fixed it? I do have an external card which works fantastic on OSX, but if I can have one less lead and use...

SupremeFX 2015 dropping out

Audio Buzzing Sound

May 16, 2018, 9:47 am

≫ Next: [ALC887] Can't get sound to work on High Sierra

≪ Previous: SupremeFX 2015 dropping out

$

0

0

Hi Guys,



So this is my first build and i have been working at this for quite some time.

My build is as follows

-ASUS TUF z270 LGA1151 Mark 2

-Intel I7 7700k

-ASUS Radeon RX 560 4gb



My issues is Im getting this wierd buzzing sound comming from my connected speakers but no actual audio from the computer comes out. it also sounds like interference.



My Audio worked perfectly be

Hi Guys,



So this is my first build and i have been working at this for quite some time.

My build is...

Audio Buzzing Sound

[ALC887] Can't get sound to work on High Sierra

May 17, 2018, 1:06 pm

≫ Next: GA-Z170X Gaming 7. Onboard Audio Help?

≪ Previous: Audio Buzzing Sound

$

0

0

A few days ago I decided to Hackintosh my new pc. The installation went good and I managed to figure everything out but audio. I've been looking around the forums and the internet for a way to get audio to work with ALC887 but all of the methods that I tried simply didn't work. I tried various kexts and patches but none of them worked.

Specs:
Mobo: Asus H110M-R
Processor: Intel Core i7-7770 3.6GHz
Graphics Card: MSI GTX 960 GAMING 4GB

GA-Z170X Gaming 7. Onboard Audio Help?

May 18, 2018, 9:49 am

≫ Next: "No Devices" Error Will Not Go Away

≪ Previous: [ALC887] Can't get sound to work on High Sierra

$

0

0

This CustoMac install went very smoothly until it came time to try patching audio.

I’ve got the system installed on an NVMe SSD fully updated 10.13.4 as of yesterday, 1060 web graphics, sleep, both LANs, USBs and SATA all nice and stable.

That was all mostly within Multibeast, though iMessage required Clover Configurator to create a hardware serial and smbios before it began working. I also had to reset the network config to get the correct SMB address of 0 and 1 for my LANs before...

GA-Z170X Gaming 7. Onboard Audio Help?

---

"No Devices" Error Will Not Go Away

May 18, 2018, 11:39 am

≫ Next: Audio ALC887 not working

≪ Previous: GA-Z170X Gaming 7. Onboard Audio Help?

$

0

0

In process of troubleshooting a new installation of HS 10.13.4 on a new GA-Z370N-WIFI board. Booting is good, but no sound and "no output device" errors. I remove all traces of the previous audio kexts and patches I could find, did the following from Toleda using Multibeast 10.3.0, but negative results (i.e. still no output devices found):
200/Z370 Intel Motherboard Series

1. Restart
2. MultiBeast > Drivers > Audio > RealtekALCxxx:
   1. √ 100 / 200 /...

"No Devices" Error Will Not Go Away

Audio ALC887 not working

May 21, 2018, 5:30 pm

≫ Next: [Solved] Audio impossible

≪ Previous: "No Devices" Error Will Not Go Away

$

0

0

I've tried everything(AppleALC+lilu.kext,realtekALC.kext, multibeast, all possible guides, tried all codes in clover) but still can't manage to get audio to work. Should I try to clean install High Sierra again, but with AppleALC+lilu.kext?

Motherboard:Gigabyte B250M-D2V-CF

Thank you in advance.

[Solved] Audio impossible

May 22, 2018, 2:39 am

≫ Next: Audio problem on Maximus IX HERO (ALC1220)

≪ Previous: Audio ALC887 not working

$

0

0

I do not know what to do anymore, I have a problem with the audio that I can not solve. I followed every kind of guide but without solving anything. Every time I restart, I find myself in the same situation. OSX does not see any audio devices. Can you help me?

Audio problem on Maximus IX HERO (ALC1220)

May 22, 2018, 7:27 am

≫ Next: ASUS Z97-A audio work but...

≪ Previous: [Solved] Audio impossible

$

0

0

Hey there!

I'm kind of new to Hackintosh so you might want to explain everything detailed (sorry for the inconvenience, this is just a quick disclaimer haha)

I've been battling with my audio on my Hackintosh for a couple of days now and I can't seem to make it work.
Here's a screenshot from my current Audio setup (http://prntscr.com/jl1dv9) (Only DisplayPort exports clear audio, the rest doesn't work).

I don't know if it any help but I used the "CloverALC audio.command"...

Audio problem on Maximus IX HERO (ALC1220)

ASUS Z97-A audio work but...

May 22, 2018, 10:16 am

≫ Next: MultiBeast Audio Failure [Solved]

≪ Previous: Audio problem on Maximus IX HERO (ALC1220)

$

0

0

Hi all,

Couple days ago I installed macOS High Sierra (and successfully update to newest version) on my PC with ASUS Z97-A motherboard with integrated Realtek ALC862 audio. Everything work great, also audio work (with Realtek ALC862 driver installed from newest version of MultiBeast) but I have strange problem with it. When macOS start I hear something like short "pop" or "crack" sound (probably I dont know name it corectly, english is not my native language, sorry for that). This sound...

ASUS Z97-A audio work but...