Quantcast
Channel: Audio
Viewing all 3453 articles
Browse latest View live
↧

Mic is too quiet (high sierra)

September 24, 2018, 7:57 am
$
0
0
Hello, last time I created hackintosh and everything was fine except my mic. It's too quiet and due that I'm unable to speak on ex. Discord. Does somebody can help me?

Specs:
I7 6700 3.4 Ghz
DDR3 2x8GB 1600Mhz
ASRock B150M PRO4S/D3
↧
Search

Stop the popping in (High) Sierra

September 24, 2018, 8:00 am
$
0
0
Hi all, since upgrading to Sierra I've had the dreaded audio pop problem. Every 30 seconds or so the audio would make a loud pop before playing anything.

The fix used to be 'Antipop' but its developer has stopped maintaining it. This small fix here does the same thing but is verified working in Sierra.

Update: Confirmed working in High Sierra. You may need to re-load the service, see below in Misc on how to do this.

1. Open Terminal (in Utilities) and type:
sudo nano...

Stop the popping in (High) Sierra
↧
↧

No Audio After Sleep/Wake - ALC898

September 26, 2018, 5:47 am
$
0
0
@Rehabman,


I am using EAPD Codec Commander and want to use a custom SSDT that can correct No Audio After Sleep / Wake situations that I've had for too long.


Not sure how to correct this?

Trying yours / darkvoid´s node dump script I found nid 0x14 using param 0x0 and nid 0x1b using param 0x0 under EAPD changed value when situation occurs from 0x00000002 to 0x00000000 and audio was lost, using hda-verb...

No Audio After Sleep/Wake - ALC898
↧

ALC887 No sound

September 26, 2018, 9:41 am
↧

After reinstallation - NO AUDIO

September 26, 2018, 2:10 pm
$
0
0
Long ago I used MacOS High Sierra. Everything worked fine, but after reinstallation (HS 10.13.6) the audio does not work. I do not use multibeast and I do not want to use it because it is not transparent enough. For boot, I use USB only! What's the problem !!!
↧
↧

Trying to get Mojave original AppleHDA.kext from Pacifist

September 26, 2018, 9:59 pm
$
0
0
Hey, I'm trying to follow the steps on toleda's guide to get my audio working, but in the steps it shows I need to original AppleHDA.kext. I downloaded the install file, used pacifist, but am unable to locate the actual .kext file. I only end up with an exec file :S
[​IMG]
↧

No Sound - AppleHDA Realtek Audio

September 27, 2018, 8:19 pm
$
0
0
View attachment 285760
No Sound -
AppleHDA Realtek Audio_v2 [Guide]
Realtek ALC/Desktop: 885, 887, 888, 889, 892, 898, 1150 and 1220 on board audio
Supports macOS/OS X versions: 10.13, 10.12, 10.11, 10.10, 10.9 and 10.8

10.13/System Preferences/Sound/Output/Internal Speakers > Green audio port
View attachment 285759
Change Log
v1.0 - 10/14/2017: High Sierra Release

Previous thread:...

No Sound - AppleHDA Realtek Audio
↧

Audio Output is not working.

September 27, 2018, 11:33 pm
$
0
0
I just updated my hackinthosh to the latest version 10.13.6 (17G2208).
The audio is working when i install the voodoo manually but the problem is the output is in 7.1.
i'm using a 5.1 output. i tried to install optical port(5.1) audio with multibeast. The installation was successful but even after rebooting my computer the audio driver is not working.
i don't know which driver should i install which would work perfectly with my mobo
The mother board is ASUS Maximus Hero 6
i need help :)
↧
Search

Dell Optiplex 9020 Mid Tower / Realtek ALC3220

September 27, 2018, 11:46 pm
$
0
0
Hi there!

I'm fairly new to the Hackintosh scene, I have gotten the whole thing set up fairly nicely with the glaring omission of the audio.

I have looked around and I know what the ALC I need to find (Kext for Realtek ALC3220) but I can't seem to get anywhere with it.

After struggling with this for a week and installing so many kext I don't know what to do any more.

Any help would be greatly appreciated or if someone has the answer which I haven't found yet then.

Cheers!
↧
↧

[Solved] Trying to get Mojave original AppleHDA.kext from Pacifist

September 27, 2018, 7:52 am
↧

VoodooHDA Default Startup

September 28, 2018, 11:55 pm
$
0
0
Hi, I had successfully installed VoodooHDA.kext and AppleHDADisabler.kext, however, when I am switching on and restarting my device, it automatically picks to "Headphones" instead of "Speakers". Any help on how can I automatically select "Speakers" instead of "Headphones"?
↧

[Solved] Firewire Audio with StarTech PEX1394B3 on High Sierra (10.13.6)

September 29, 2018, 3:48 pm
↧

No Audio/Audio Devices After Mojave Update

September 29, 2018, 6:24 pm
$
0
0
In High Sierra, whenever I would install an OS update I would have to re-install the audio drivers from Multibeast and reboot my computer. There's a place to choose ALC1150 and another place to choose support for 100 and 200 series board, and I always just checked those and ran Multibeast's installer and all was good.

However, I've just updated to Mojave and that method doesn't work. Do I just need to wait for a new version of Multibeast, or is there a workaround? I read in another thread...

No Audio/Audio Devices After Mojave Update
↧
↧

z270a problem

September 30, 2018, 3:45 am
$
0
0
Hi everyone
I have a problem, I had a problem with hwmonitor, it turned out that I did not install it with the help of mulitbeast. So I installed it and it did not sound from the speakers right after that. So I installed it, and after that it dont have sound from the speakers.

I'm doing it now
See No Sound - AppleHDA Realtek Audio/Post #1/Problem Reporting.

I can not only make points 5

I have...

z270a problem
↧

Codec-Commander support request please

September 30, 2018, 7:35 am
$
0
0
Hi, I am hoping someone can help me with this, I have working sound but sleep breaks it

Background: I had codec-commander kext working on my El-Capitan install and it fixed my no sound after sleep problem. I got help with this from TimeWalker75a at Insanely Mac and I understand he was the original author of codec-commander but development of this has now been taken up by @RehabMan - Unfortunately I lost the kext and I can't now make a new one that works. I dont have the...

Codec-Commander support request please
↧
Search

Audio on ga-p35-ds3 (ALC 889a)

October 1, 2018, 7:42 am
$
0
0
Hi guys,

I could successfully made a second hackintosh with the following hardware:
  • GA-P35-DS3 (LGA775)
  • Xeon E5450
  • 4GB DDR2
  • ATI 5770
  • HDD 320 GB
Everything works fine except audio. The chipset audio is ALC 889A. I tried to installed the kext ALC885/889a from multibeast, but i still have no sound. No output devices are found too.

I also try vodookext and some youtube videos.

How can I solve my problem?

best regards
↧

How to fix onboard Creative Audio chipset?

October 1, 2018, 8:30 am
$
0
0
i7 8700k
Gigabyte z370 aorus gaming wifi
Geforce 1050 Ti G1 Gaming

After the installation onboard Creative audio is not working. can anyone help me in this regard. I installed version 10.13.6. I am new to Hackintosh. This is my first Hackintosh Build.
↧
↧

GA-P35C-DS3R audio in High Sierra

October 1, 2018, 8:41 am
$
0
0
Hi!
I have an old GA-P35C-DS3R with a Core2Duo E8400 on which I'm trying to install High Sierra. Everything is working except the audio. I used the audio_cloverALC-130.command file and I can see the devices on the preferences. The problem is that the audio is somehow glitch as it keeps getting cut out and in. Any ideias on how to fix it? Is anyone already had this issue?

Thanks!
↧

sound work boot sierra with USB. after boot SSD sound drive isn't recognize

October 1, 2018, 12:06 pm
$
0
0
I have an issue when I get sierra into boot SSD. before, I installed my ALC 889 with clone ALC and everything is worked.
after sierra boot from SSD all gone and i can't see any device in system. how is that possible?
↧

ALC892 on Mojave 10.14 not working - no device

October 2, 2018, 8:24 am
$
0
0
Hi folks,
I just updated to 10.14 and got a "no output devices found" under the sound panel with the settings app.
I'm on a GA-Z170-X with ALC892 audio chipset.
Attached is my current clover plist config file.

Thx

P.S. It works with VoodooHDA-2.9.0-Clover-V12
↧
Viewing all 3453 articles
Browse latest View live
Search