Quantcast
Channel: Audio
Viewing all 3453 articles
Browse latest View live
↧

macOS High Sierra - Installation success but no Audio. help!!!!

October 3, 2018, 2:48 pm
$
0
0
Hi guys,

I've successfully managed to fresh install macOS High Sierra on my hackintosh with msi Z97 Gaming 3 mobo. However, as always I've run into the problem of no audio. I've tried some tutorials on this forum with VoodoHD and Realtek audio guides no luck. If I remember clearly back in Sierra, using Multibeast I think I installed ALC 1150, 898 kexts for audio on this board. Not 100% sure.

Could you please help me get back Audio on this mobo. It sucks because back then, we could use...

macOS High Sierra - Installation success but no Audio. help!!!!
↧
Search

Apogee Maestro / Duet2 not working on Sierra Hackintosh

October 3, 2018, 5:11 pm
$
0
0
Hey. I just made my first Hackintosh. Basically I started with El Capitan because I used a Apogee Duet 1 for years and I've seen that the support expired with the start of Sierra. A few days later my Duet 1 broke and I decided to buy the Duet 2. I was surprised how fast it worked with my Hackintosh El Capitan. But I thought it would probably be better to make an update to Sierra now before I spend to much time configuring my El Capitan.

So.. the Sierra installation went pretty well. But now...

Apogee Maestro / Duet2 not working on Sierra Hackintosh
↧
↧

Focusrite Scarlett 2i4 sound distortion

October 4, 2018, 7:29 am
$
0
0
Hi,

I bought a Focusrite Scarlett 2i4 a few days ago for recording but also for music listening.
It is working fine on my hackintosh but if I stress the CPU too much (100 %) the sound gets distorted and after a few seconds it stops completely.
I can reproduce the problem by running Prime95 with In-Place Large FFTs.
Is there a way to fix that issue? Maybe with a PCI USB 2.0 card?
↧

Problem with onboard sound card Mojave

October 4, 2018, 2:23 pm
$
0
0
Hi, I am looking for an external sound card that will work with macOS Mojave. As I can't get my On board ACL 892 working. Any help would be very welcome or better still how can I get my onboard sound card to work with macOS Mojave?
↧

Two devices detected after install VoodooHDA

October 4, 2018, 3:18 pm
$
0
0
I install the driver in the Clover folder (since I ship Clover from a flash drive)
The sound came out - but not clear - distorted.
Installed the VoodooHD Panel - removed the use of SSE2 (did not help)
Tell me what to do to remove the distorted sound?

efi/clover/kexts/other
VoodooHDA.kext (last.update)
AppleHDADisabler.kext

AIDA64:
Intel Skylake HDMI @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1] PCI
Realtek ALC233 @ Intel Sunrise Point-LP PCH - High Definition...

Two devices detected after install VoodooHDA
↧
↧

Apogee Duet issue

October 4, 2018, 5:40 pm
$
0
0
Good morning,

I've been noticing for quite sometime that from time to time the sound on the youtube videos gets distorted, then the sound simply disappears while the video increase its speed at the same time; and then finally page crashes.

I was chasing this event through the logs and found multiple entries of the one below:

Kernel:
Sandbox: com.apple.WebKit(48913) deny network-outbound /private/var/run/com.apogee.duetUSBDaemon/Socket

Does anyone knows what that means and how to fix it?...

Apogee Duet issue
↧

[Guide] How to Make a Copy of IOReg

October 5, 2018, 11:16 am
$
0
0
IORegistryExplorer aka IOReg
Apple Developer Tool
Xcode

How to Make a Copy of IOReg (Note 1)
1. IORegistryExplorer/File/Save a Copy As…. (no extension required)
2. Open file to verify (Note 2)
3. Attach to post (Note 3)

Where To Get IOReg
1. Download Interim, link below

Installation
1, Open Downloads/IORegistryExplorer-SLRID_v10.6.3
2. Drag IORegistryExplorer to Applications

Notes
1. An IOReg.txt is not useful. It is not a "Copy of IOReg." Do not...

[Guide] How to Make a Copy of IOReg
↧

No audio devices after dual booting windows

October 5, 2018, 2:49 pm
$
0
0
Intermittent problem with no audio devices after dual booting from windows 10 back into High Sierra using cloverALC. Windows is using the default microsoft driver and not the realtek drivers.

It may take five or six reboots or an extended shutdown for the audio to be detected back in Mac OS 10.3.6

ALC1150 Z97X-UD7-TH
↧
Search

Gigabyte GA-Z77X-UD3H

October 6, 2018, 4:17 am
$
0
0
Hello,

As the GA-Z77X-UD3H is often dubbed to be (one of) the best Hackintoshable mainboards, I'm surprised to find the amount of trouble I am having in getting the sound to work (VIA VT2021).
There are various guides around but most seem to deal with older versions of OSX, as this is a 2012 board, obviously.

But does anyone have a solution on getting it to work with 10.13 High Sierra?

I'm pretty new at this as this is my first build, after geting seriously hacked off with Win10. I have...

Gigabyte GA-Z77X-UD3H
↧
↧

Stop the popping in (High) Sierra

October 6, 2018, 12:57 pm
$
0
0
Hi all, since upgrading to Sierra I've had the dreaded audio pop problem. Every 30 seconds or so the audio would make a loud pop before playing anything.

The fix used to be 'Antipop' but its developer has stopped maintaining it. This small fix here does the same thing but is verified working in Sierra.

Update: Confirmed working in High Sierra. You may need to re-load the service, see below in Misc on how to do this.

1. Open Terminal (in Utilities) and type:
sudo nano...

Stop the popping in (High) Sierra
↧

Dell Optiplex 790 ALC269 device with GT710 2gb DDR3 NO AUDIO

October 6, 2018, 1:44 pm
$
0
0
I have Dell Optiplex 790 SFF

Intel core i5 2400
16gb ram
1tb hdd

and I have sucessfully installed macOS Sierra by using Gigabyte GT710 2GB DDR3 Graphic card
and i have connected via HDMI port of Graphic Card to My LED Screen. But now i'm having problem with audio (sound)

i tried installing Realtek ALC269(Brix only) and also tried VoodooHDA 2.8.6 but nothing worked.

Please let me know for audio.
↧

Creative CA0132 codec discussion (Sound Core3D)

October 7, 2018, 3:11 am
$
0
0
Because a few users ask if audio is possible with this codec, especially for the GA-Z170X-Gaming 7 mainboard, here some solutions:

Below, a fully patched kext that gives you the default outputs. For headphones and front microphone you can use the attached switcher. Other layouts are also possible.
Why a fully patched kext? because i think it is the easiest way to make audio working. The Gigabyte Gaming 7 users, without a patched DSDT need only the HDAS to HDEF clover-patch.

If you want to...

Creative CA0132 codec discussion (Sound Core3D)
↧

Problem with Realtek ALC221 / HP Compaq 6300 Pro

October 8, 2018, 8:10 am
$
0
0
Hello Guys,
currently, I'm facing an unusual problem with Realtek ALC221.
As a start, I have followed this guide:
https://www.tonymacx86.com/threads/...the-hp-6300-pro-8300-elite-desktop-pc.243272/

I've HP Compaq 6300 Pro.
After following the audio video, the audio works very efficiently and after installing the new Xcode 10 and installing the additional files and restarting the PC, the sound stopped working, I followed the steps in the video again and...

Problem with Realtek ALC221 / HP Compaq 6300 Pro
↧
↧

Help finding Y-adapter for Apple earpods with line-in/out on motherboard

October 8, 2018, 8:26 am
$
0
0
Hi. I tried searching the forum and google and amazon but still haven't found a confirmed solution.

I'd like to use the 3.5mm iPhone earpods with my motherboard and am looking for a Y adapter. I want the headphones connected to the green line-out and the mic connected to the pink line-in. The challenge is finding an adapter that's compatible with the proprietary CTIA configuration of apple headphones.

I'm thinking to try these but the reviews are mixed. One review says it works, the...

Help finding Y-adapter for Apple earpods with line-in/out on motherboard
↧

[SOLVED] ALC867 / ACL891

October 8, 2018, 8:54 pm
$
0
0
Hi guys
I have been searching this sound issue for 2 weeks. I tried many different ways. RealtekALC.kext that I used didn't work, so I used AppleALC.kext. It works perfectly.
mine is ALC867=ALC3863 (hp mini desktop). and others who have ALC891 (Asus Z97-P). I think it will work too.

installation
1. if you have voodoohda or realtekalc, you need to remove or uninstall it. restart
2. Retore original AppleHDA.kext. this kext is important. bring it back.
2.1 install it using kext utility
2.2...

[SOLVED] ALC867 / ACL891
↧
Search

Audio Muting/Unmuting itself repeatedly

October 9, 2018, 8:24 am
$
0
0
Hey all,

After initial install no audio devices were showing up in my list so I installed a couple of the drivers, which I'm assuming I got wrong as its muting/unmuting itself every few seconds so I get a lot of 'popping' sounds while listening.
When it happens this is a screen shot of what the audio is 'popping' to (it lowers the audio volume and ticking mute, then half a second/1second later it goes back to what it was):
View attachment 356481

Info:...

Audio Muting/Unmuting itself repeatedly
↧

Any way to auto-switch source to HDMI when unplugging headphones on VoodooHDA?

October 9, 2018, 5:49 pm
$
0
0
Basically the title says most of my question. I was reluctant to use VoodooHDA after the bad experiences others had, but it was really my only option since not a single audio installation method worked after updating from 10.13.5 to 10.13.6. AppleALC technically worked, but front panel audio had heavy crackling and distortion no matter the bitrate and HDMI audio (DVI2HDMI) did not work. This meant to use headphones, I had to extend the cable form the rear panel audio, which had clear audio....

Any way to auto-switch source to HDMI when unplugging headphones on VoodooHDA?
↧
↧

Audio help

October 9, 2018, 6:51 pm
$
0
0
Hey guys, I can't seem to get my audio working on the line in line out on mobo, My USB adapter works fine, Ive tried a lot of stuff too. Ive used clover ect as bootloader. Gigabyte Z370 Auros Gaming 5 with 8700k. thanks for any help, I got Lilu and AppleHDA kext installed and cloverconfig setup correctly if I remember the Layout id 11 worked good with this board when it was working.
↧

AppleALC driver for Gigabyte X299 Aorus Gaming 9 ALC1220 audio

October 10, 2018, 12:34 am
$
0
0
This driver is for Gigabyte X299 Aorus Gaming 9 ALC1220, for stero 2.0 only, and it's working with lilu, This driver is compiled with Applealc 1.2.5 and lilu 1.2.3, please put both of these two kexts in clover/kexts/other.

And in clover-ACPI-DSDT-Patches, please be sure this patch added.

step 1
Code:
comment:CAVS -> HDEF
find: 43415653
replace: 48444546
[​IMG]...

AppleALC driver for Gigabyte X299 Aorus Gaming 9 ALC1220 audio
↧

No audio device on a clean Mojave install?

October 10, 2018, 1:35 am
$
0
0
Hi,
  • Board: Gigabyte GA-H170N
  • CPU: Intel i7 6700
  • Codec: ALC1150
  • Install: Mojave installer from USB to a freshly formatted SSD
My system now boots after a disc wipe, install and MultiBeast (FakeSMC, Clover & iMac 14.2 ONLY). However I have no audio device showing in System Preferences.

I've followed the "Mojave HDA audio" thread over at https://www.tonymacx86.com/threads/mojave-applehda-audio.260004/ and opted for install option B as Multibeast 11...

No audio device on a clean Mojave install?
↧
Viewing all 3453 articles
Browse latest View live
Search